Product image for Sylvania 20586 40 W 82 CRI 4100 K 3150 lm 2G11 Base Single Ended Twin Tube T5 Compact Fluorescent Lamp
Image thumbnail 0
Image thumbnail 1

Email

Sylvania 20586 40 W 82 CRI 4100 K 3150 lm 2G11 Base Single Ended Twin Tube T5 Compact Fluorescent Lamp

Manufacturer: LEDVANCE Sylvania | Catalog # 20586 | Cooper Electric Part # 22993

$13.63 /ea
ea
Log in or register to view your price, purchase history, and more!
0

Not Available for Pickup at Ocean Closes 5:00PM ET
284 available

For Delivery

Order by Thursday 5:00pm ET for delivery Friday
Not in local stock *
Check another branch
DULUX 40W long compact fluorescent lamp with 4 pin base, 4100K color temperature, 82 CRI, ECOLOGIC for use on magnetic, electronic and dimming ballasts

Technical Information

Applications
For Residential/Commercial use
Average Rated Life
15000 hr
Ballast Type
Electronic
Base
2G11
Bulb Shape
T5
Color Accuracy
80
Color Rendering Index
80-89
Color Temperature
4100 K
Correlated Color Temp
4,100 K
Lumens
3,150 Lumen
Standard
ANSI C-73
Start Type
Rapid
Total Harmonic Distortion
Ballast Dependent
Type
FT40DL841RSECO 10/CS 1/SKU
Wattage
40 Watt

Packaging

Units Per Case
10

Manufacturer Information

Brand
Osram Sylvania
Sub Brand
Dulux L

General Product Info

12-Digit UPC
046135205866
Finish
phosphor
GTiN
00046135205866
Product UPC
04613520586

Dimensions

Diameter
0.79 Inch
Length
22.4 Inch
Footnotes
  • Rule of Thumb for Compact Fluorescent Lamps: Divide wattage of incandescent lamp by 4 to determine approximate wattage of compact fluorescent lamp that will provide similar light output.
  • There is a NEMA supported, industry issue where T2, T4, and T5 fluorescent and compact fluorescent lamps operated on high frequency ballasts may experience an abnormal end-of-life phenomenon. This end-of-life phenomenon can resultin one or both of the following: 1. Bulb wall cracking near the lamp base. 2. The lamp can overheat in the base area and possibly melt the base and socket. NEMA recommends that high frequency compact fluorescent ballasts have an end-of-life shutdown circuit which will safely and reliably shut down the system in the rare event of an abnormal end-of-life failure mode described above. The final requirements of this system are yet to be defined by ANSI. For additional information refer to NEMA papers on their WEBSITE at www.NEMA.org.
  • Approximate initial lumens after 100 hours operation.
  • Minimum starting temperature is a function of the ballast; consult the ballast manufacturer.
  • The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life.



Compare