Above Ground Insulation Piercing Connectors 2 Bolt Main 500-2/0 Tap 4/0-4 - Anyone can use our Above Ground ConnectorAbove Ground Insulation Piercing Connectors 2 Bolt Main 500-2/0 Tap 4/0-4 features include: Connector Installs In Just Minutes Saving Many Man-Hours On The Job Eliminates Wire Stripping, Connecting amp; Taping of Split Bolts and Adding Inhibitor Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns Overhead services - both insulated amp; bare mains, above grade URD services, street lighting, non-tension splicing amp; tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps. Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, amp; eliminating the possibility of hot spots, damaged wires or loose connections No cable stripping required, simply insert the jacketed cable into the entry port amp; tighten with a 1/2 6 point socket The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head.nbsp; The installer has no contact at any point with an energized part. Can be installed on energized conductors, however, the tap must not be under load. Corrosion-free connection is good for hot, cold, damp, amp; salty connections.nbsp; Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water.nbsp; Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized. The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts UL486B Listed for cu to cu, al to al, amp; cu to al; 600 Volt, 194deg;F (90deg;C) Rated, Meets ANSI C119.4 requirements Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT) Order Qty of 1 = 1 Piece Below is more info on our Above Ground Insulation Piercing Connectors 2 Bolt Main 500-2/0 Tap 4/0-4
