Product image for FLK FLUKE-710 mA Loop, Valve Tester
Image thumbnail 0
Image thumbnail 1
Email

FLK FLUKE-710 mA Loop, Valve Tester

Manufacturer: Fluke | Catalog # FLUKE-710 | Cooper Electric Part # 1379435
$3,488.76 /ea
ea
Log in or register to view your price, purchase history, and more!
Out of stock, please contact your sales representative for availability, pricing and lead times
Product Spec Sheet
The Fluke 710 valve testing loop calibrator is designed to enable quick easy tests on HART smart control valves. Special test procedures built into the 710 enable users to initiate a test and get quick answers on the health of the valve. Test results of Good/Marginal/Bad after a test will help the user to decide if additional maintenance is necessary.

Technical Information

Applications
mA source, mA simulate, mA read, mA read/loop power, and volts read
Power Consumption
6 AAA alkaline, 40 hours continuous use
Type
Lopps Valve Tester

Manufacturer Information

Brand
Fluke Corporation

General Product Info

12-Digit UPC
095969872959
GTiN
00095969872959
Product UPC
09596987295
Key Features
  • Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
  • Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
  • enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
Other Useful Features
  • Manual testing; manually change the mA signal and view the HART position and pressure variable information
  • Full range ramping of the mA signal from 4 to 20 to 4 mA while recording the 0-100-0% position, or the pressures applied that move the valve from 0-100-0%
  • Stepping the mA signal on the input to the valve in steps and evaluating the valves response to the mA input changes
  • Speed tests to determine how fast the valve can open or close
  • Bump and partial stroke tests that help test valves over a portion of their range so they can be tested in a live process
  • Upload, print and plot logged valve tests taken in the field
  • Compare previous uploaded tests to recent tests
  • View valve test history by HART Tag ID
  • Export valve test data to CSV for additional analysis in Microsoft Excel®
  • Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to (20) HART devices in your plant and output data in either (.csv) or (.txt) format.
  • Data logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 60 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.
  • Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
  • Generic HART communication
  • Best-in-class mA accuracy at 0.01 % measurement or source value
  • Compact rugged design
  • Intuitive user interface with Quick-Set knob for fast setup, easy to use
  • 24 V DC loop power with mA measure mode (-25 % to 125 %)
  • Resolution of 1 ?A on mA ranges and 1 mV on voltages ranges
  • Built in selectable 250 ? resistor for HART communications
  • Simple two wire connection for all measurements
  • Auto shutdown to conserve battery life
  • Variable step and ramp time in seconds
  • Read sensor PV information
  • Read PV output information
  • Read and write PV unit type, tag ID name, descriptor, and message
  • Read and write PV ranges (upper and lower)
  • Enter/exit fixed current mode
  • Set zero offset
  • Trim DAC zero (mA output 4 mA)
  • Trim DAC gain (mA output 20 mA)
  • Autotrim of valve controller
  • Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to 20 HART devices in your plant and output data in either .csv or .txt format
  • Data-logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 6 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.
Product Overview
  • Smart Control Valve Testing is now easier than ever
  • The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary.
  • Valve testing and HART communication in a precision loop calibrator
  • With the 710 Valve Testing Loop Calibrators built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valves HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valves internal I/P (which moves the valve) can be determined through the HART communication protocol.
  • The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button.
  • Pre-configured valve tests, at-a-glance answers
  • Valve test routines built into the 710 include:
  • ValveTrack™ Software enables further analysis and trending
  • Valve tests that are logged and recorded to memory in the 710 are available to upload to included
  • ValveTrack™ analysis software
  • ValveTrack™ software enables you to:
  • Saving time, getting answers
  • In addition, the 710 offers:
  • Product Highlights
  • HART communication
  • The Fluke 710 offers a built-in HART modem to communicate the following HART commands:
  • HART Commands for Valves
  • The 710 includes these unique HART commands to support control valves:
  • In addition, the Fluke 710 offers:
  • Related blog posts:
  • Automated valve testing
Compare