Product image for LEV WSS20-G9N W/I/LA WL RECEIV SW 1
Email

LEV WSS20-G9N W/I/LA WL RECEIV SW 1

Manufacturer: Leviton Mfg Co | Catalog # WSS20-G9N | Cooper Electric Part # 1147830
$51.51/ea
ea
Log in or register to view your price, purchase history, and more!
Out of stock, please contact your sales representative for availability, pricing and lead times
Product Spec Sheet Safety Data Sheet
LevNet RF wire in receiver switch Decora Rocker 10A relay Dip switches: AutoON/AutoOFF ManualON/AutoOFF Walk-through mode Repeater Disabled Time delay (2/10/20/30m) Range 30-150' 902MHz EnOcean protocol 120/208/220/230/240/277v 1P No Neutral, Title 24 compliant, ASHRAE 90.1 compliant

Technical Information

Applications
Residential
Frequency
902 MHz
Input Voltage
120 V
Operating Temperature
0 degrees C
Type
Receiver Switch

Manufacturer Information

Brand
ENERGY MANAGEMENT
Sub Brand
ROOM CONTROLS

General Product Info

12-Digit UPC
078477671795
Color
Ivory,Light Almond,White
GTiN
60078477671797
Product Type
Wall Switch Receiver
Product UPC
07847767179
Protocol
EnOcean Wireless 902 MHz

Certifications and Compliance

Country of Origin
Mexico
Features
  • Decora Design Aesthetics - intuiative rocker switch with return-to-center design
  • No New Wiring Required the LevNet RF Wall Switch Receivers simply replaces the existing light switch and communicates with self-powered switches and sensors via radio 902MHz frequency
  • Vacancy Switching provides pushbutton manual-ON/OFF light switching of each light load at any time
  • Maximize Energy Savings when paired with LevNet RF PIR Occupancy Sensor, the LevNet RF Wall Switch Receivers contain all sensor settings. Manual-ON/Auto-ON, auto-ON/auto-OFF, Walk through timer, auto time-out selections of 2 minutes for testing (10, 20 or 30 minutes). Allows flexibility and customized adjustments to maximize energy savings.
  • Presentation/Viewing Mode turn lights OFF and keep them OFF while room is occupied (i.e. for slide or film presentations), automatically returns to normal when manually switched back ON or room becomes vacant and time delay expires
  • Walk-Thru Feature maximizes energy savings by assuring a 2.5 minute time-out if motion is not present after 2.5 minutes in Auto-ON mode
  • Standard Size for Seamless Installation LevNet RF Wall Switch Receivers fit in a standard single gang wall box
  • Required Wiring - neutral and non-neutral models available; non-neutral requires 25W minimum load
  • Zero-Cross Relay: switches at the zero crossing point of the AC power curve to ensure maximum contractor life and compatibility with electronic ballasts
  • Energy Savings and Efficiency lowest power consumption of any RF device - less than 1/2W per 120V device and less than 2/3W per 277V device annually - approximately 70% savings over other RF devices
  • Air Gap Switch assures A/C power disconnects for safety on No-Neutral switch
  • Color Change Kits White, Ivory and Light Almond included for design flexibility, ease of ordering, inventory and cost control
  • 10A load rating for commercial lighting circuits
  • EnOcean technology enabled for LevNet RF communication from self-powered lighting controls
  • H.I.S. (High Inrush Stability) arcing design for use with all commercial ballasts
  • Retrofit Energy Saving Bi-level Lighting with Occupancy Sensor Control replace two light switches with LevNet RF Wall Switch Receivers pair both with Self-Powered RF PIR Sensor, set the first LevNet RF Wall Switch to Auto-ON/Auto-OFF and the second to Manual-ON/Auto-OFF
  • Product Compatibility - LevNet RF 902 MHz products
Compare