Product image for LOTUS LED LIGHTS LY4RCS/30K/WH 4 x 1/2 Inch 9 W 120 VAC 3000 K White Round Recessed LED Light Fixture
Image thumbnail 0
Image thumbnail 1
Image thumbnail 2
Email

LOTUS LED LIGHTS LY4RCS/30K/WH 4 x 1/2 Inch 9 W 120 VAC 3000 K White Round Recessed LED Light Fixture

Manufacturer: Lotus LED Lights | Catalog # LY4RCS/30K/WH | Cooper Electric Part # 1011082
$38.44 /ea
ea
Log in or register to view your price, purchase history, and more!
Out of stock, please contact your sales representative for availability, pricing and lead times
Product Spec Sheet
The Ultimate Home Renovation Lighting Fixture. Top Seller. For Insulated & Dropped Ceilings and Soffits.

Technical Information

Amperage
0.075 Amp
Applications
Downlight
Beam Angle
110 degrees
Beam Spread
105 degrees
Color Accuracy
84
Color Rendering Index
84
Color Temperature
3000 K
Cord Type
Hard Wire
Correlated Color Temp
3,000 K
Enclosure Type
Recessed
Fixture Wattage
9.0 W
Lamp Type
recessed
Lens Type
acrylic lens
Lumens
560 Lumen
Mounting Configuration
Recessed
Mounting Type
Recessed
Number of Lamps
1
Rated Voltage AC
120 V
Rated Voltage DC
120 V
Type
Home - Lighting Fixtures
Voltage
120 Volt

Manufacturer Information

Brand
Lotus LED Lights
Sub Brand
Lotus LED Lights

General Product Info

12-Digit UPC
638458884875
GTiN
00638458884875
Housing Finish
recessed
Housing Material
Aluminum Alloy
Product Category
Home - Lighting Fixtures
Product Type
Home - Lighting Fixtures
Product UPC
63845888487
Used With
Stand Alone
Features
  • Dimmable
  • cULus Listed, cETLus Approved and Energy Star Certified
  • Type IC Rated Approved for Direct Contact with Insulation
  • Pot Light Housing is NOT Required even for Insulated Ceilings
  • Air-Tight and Damp Location Approved
Installation
  • ALL FIXTURES MUST BE INSTALLED IN ACCORDANCE WITH CURRENT APPLICABLE ELECTRICAL CODES.
Dimensions
  • OD 4 3/4? (120 mm); ID 4 1/8? (105 mm); Thickness 1/2? (12 mm)
Construction
  • Round 4? fixtures with integral LEDs. Isolated external driver factory installed inside junction box. One driver for every fixture required.
Choosing The Light Colour
  • Warm White 3000K is yellowish, similar to halogen and incandescent light. Creates soft, calming feeling. We recommend the Warm White for bedrooms, living rooms and kitchens with warm coloured countertops and cabinets.
  • Neutral White 4100K is whiter, colder and more energizing light. Using this colour will make the room look white, modern and brighter. We recommend the Neutral White for bathrooms, offices and work areas, garages, kitchens with white or dark countertops and cabinets.
  • Our experience with LED recessed lights since 2008 shows that about 70% of our customers prefer the Warm White and 30% like the Neutral White.
Dimming
  • We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
  • For a typical LED dimmer rated for 150W LED load the maximum number of fixtures per dimmer is 16.
Technical Specifications
  • Suitable for damp locations and soffit installations.
  • Not suitable for steam showers, saunas and outdoor locations where directly exposed to rain.
Trim Colour Options
  • Available in White, Brushed Nickel and Black Trim
Options for Locating Driver
  • Fixture comes connected to the driver by 12? long low voltage cable with waterproof connector in the middle. Depending on where you want the driver to be you have 2 options:
  • 1. Locate next to the fixture run line voltage wiring to first junction box and daisy chain to the junction boxes of the other fixtures.
  • Or install all drivers at one location and use low voltage extension cables to the fixtures. Use only extensions provided by the manufacturer. Available jumper cables are 6 feet (1.8m) and 20 feet (6m). Cables are linkable. Maximum run should not exceed 40 feet (12m).
Mounting
  • Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the hole 2?.
Compare